You found the cardiac monitor show straight line in a sleeping patient in CCU, what you will do?
- a- call for CPR
- b- give cardiac massage
- c- check cardiac monitor leads
- d- give cardiac shock.
The correct answer is c.
check cardiac monitor leads. If you found the cardiac monitor showing a straight line in a sleeping patient in CCU, the first thing you should do is check the cardiac monitor leads. This is because a straight line on the cardiac monitor could be a false alarm caused by a loose or disconnected lead.
Here are the steps on how to check the cardiac monitor leads:
- Look at the leads:
Make sure that the leads are securely connected to the patient's skin.
- Wiggle the leads:
Gently wiggle the leads to see if the monitor picks up any cardiac activity.
- Replace the leads:
If the leads are loose or disconnected, replace them with new leads.
If the patient is still unresponsive after checking the leads, then you should call for CPR and start cardiac massage. However, you should not give cardiac shock until the patient has been defibrillated.
Here are the steps on how to perform CPR:
- Call for help:
Call for help or activate the emergency response system.
- Check for breathing:
Check to see if the patient is breathing. If the patient is not breathing, start CPR.
- Start chest compressions:
Place the heel of your hand on the patient's chest, in the center of the chest, between the nipples.
- Compress the chest:
Push hard and fast, at a rate of at least 100 compressions per minute.
- Continue CPR:
Continue CPR until the patient starts breathing on their own or until medical help arrives.
Labels
Nursing questions